F2002 bespoke kit arrived today…

Posted on Updated on

This morning my order from Brian at Fawcett models and patterns arrived. Very fast and efficient service from Brian. Great lad and great northern personality too. Anyway on with the kit. I’ve not had a great amount of time with it today as I’ve been working however I’ve spent the past few hours having a look at all the parts and can honestly say it’s going to really change the look of the famous F1 car that is the F2002. I have opened up all the zip seal bags and taken a photograph of the parts for you. Here they are. Firstly the more accurate wheels that you don’t get with the original Revell kit.

20140624-224332-81812493.jpg

Secondly the gearbox and for me personally what changed my mind about the kit and made me think about how we could make it better. Once Brian started re doing the gearbox it was apparent that more had to be changed therefore he went on a mission. In one of the later images there are some electrical connector parts that sit on top of the gearbox ready for wiring.

20140624-224532-81932684.jpg

Third in line were the rocker heads. The original kit ones that are shown in the wip on my home page were very toyish in appearance and not very accurate. Once I have put the engine block and the gearbox together you will notice the difference straight away and the more accurate depiction.

20140624-224729-82049288.jpg

Next are some extra parts as mentioned previously that sit around the top of the gearbox and behind the petrol tank at the back of the monocoque. Also you will see the wheel nuts and threads. Once these are painted up they will look like the real thing.

20140624-231711-83831793.jpg

20140624-224924-82164802.jpg

20140624-224925-82165674.jpg

20140624-231505-83705300.jpg

Above there are also the front and back plates for the engine blocks.

Next are the discs, brake/wheel hubs and the callipers.

20140624-225132-82292293.jpg

20140624-231350-83630168.jpg

Lastly the suspension arms for the rear and the front suspension supports left and right. I will obviously go into more detail when I am adding these parts prepping and finishing them in my wip but for now this is just to show you what is provided.

Firstly I’d like to thank Brian for taking on this challenge. He didn’t have to do this but he obviously is a meticulous and very hardworking guy who saw a need to make a better kit for something that had a lot of potential but didn’t quite have it in the Revell kit. Some have said and some may feel what’s the point but then my thoughts are why not? Apart from these areas on the oob kit the general quality is ok to be honest I think it’s better than most Revell kits I’ve had or had the misfortune to own…. So I hope to get to this soon and get it finished. It’s a long road and should look awesome when finished. I’m also going to do my usual add stupid amounts of extra detail so watch this space and the ride should be good.

The kit is boxed and sealed very well and all parts are protected in the package with bubble wrap. There is a DVD that comes with the set as an aid. The only criticism I have is that a couple of the images are out of focus, however for me it’s not an issue and i’m not going to pull Brian down for this. To be honest the work is in the product not the cd. Awesome matey and I hope to use some more of your products in the future.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s